Ningbo Zhonggao Rubber & Plastic Manufacturing Co., Ltd. is one of the most reliable manufacturers and suppliers of glazing seals in China. The company has world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale custom made glazing seals from our factory.
Glazing Seals
Our custom glazing seals provide reliable sealing between glass and frame systems, with profile geometry, material, and hardness matched to application requirements. They help maintain stable compression, installation compatibility, and long-term protection against air, water, and environmental exposure.
Technical Specifications
Rubber Material Selection:
|
Rubber Material |
Key Performance |
|
EPDM |
Weather Resistance & Water/Steam Compatibility |
|
Silicone (VMQ) |
Extreme Temperature Resistance & Biocompatibility |
|
FKM |
High Temperature & Chemical Resistance |
|
Flame-Retardant Rubber |
UL94 V-0 Flame Retardancy & Fire-Sealing Applications |
|
Conductive Rubber |
Electromagnetic Shielding & Anti-Static Performance |
Glazing Seal Specifications:
|
Specification |
Technical Parameters |
|
Rubber Material |
EPDM, Silicone Rubber (VMQ), FKM, Flame-Retardant Rubber, Conductive Rubber |
|
Operating Temperature |
EPDM/Silicone: -40°C to +120°C; VMQ: -70°C to +250°C; FKM: -20°C to +320°C |
|
Outdoor Service Life |
10 years |
|
Surface Friction Coefficient |
0.1–0.2 |
|
Dynamic Friction Reduction |
40%–50% |
|
Rebound Rate |
≥90% |
|
Waterproof Rating |
IP67 |
|
Sound Insulation Improvement |
20–30 dB |
|
Tear Resistance |
20–30 kN/m |
|
Dynamic Wear Rate |
1/3 of ordinary rubber |
|
Service Life vs. Traditional Seals |
2–3 times longer |
|
Flame Retardancy |
UL94 V-0; flame spread rate ≤40 mm/min |
*Final specifications should be confirmed against the approved drawing, sample, material grade, and testing requirements.
Custom Glazing Seals
We manufacture custom glazing seals based on your profile drawing, existing seal sample, aluminum extrusion, glass dimensions, material requirements, and glazing conditions.

Custom Profile & Cross-Section
We can produce:
- Custom width, height, wall thickness, and sealing lip dimensions
- Grooves, locking ribs, retention features, hollow chambers, and other profile details
- Straight, irregular, and system-specific cross-sections
- Profiles matched to aluminum frames, glazing pockets, and glass thickness
- Custom cut lengths and project-specific profile configurations
Rubber Material & Hardness
Material and hardness can be selected according to:
- Indoor or outdoor exposure
- Operating temperature
- UV, ozone, moisture, and weather conditions
- Glass and aluminum system requirements
- Sealant, coating, or adjacent material compatibility
- Required compression and sealing performance
- Static glazing or movement conditions
Available material options include EPDM, silicone rubber (VMQ), TPV, and FKM.
Drawing / Sample
You can provide:
- CAD or technical drawings
- Existing glazing seal samples
- Aluminum profile or extrusion samples
- Glass thickness and glazing pocket dimensions
- Groove dimensions and critical tolerances
- Material, hardness, color, and sealing requirements
We can use these details to evaluate the profile geometry and develop a suitable glazing seal for your system.
Tooling & Sample Development
Custom extrusion tooling can be developed for approved glazing seal profiles, with samples produced for:
- Cross-section and dimensional verification
- Aluminum profile fit testing
- Glass or panel installation testing
- Compression and retention verification
- Material and hardness confirmation
Approved samples and technical specifications can then be used as the reference for mass production.
OEM & Replacement Service
We support custom:
- Profile dimensions and cross-sections
- Rubber material and hardness
- Color and surface finish
- Cut lengths
- Packaging and product identification
- Customer drawings, samples, and specifications
- Replacement production based on existing glazing seals
For customer-provided drawings, samples, or tooling, project information can be handled according to agreed confidentiality and production requirements.
Glazing Seal Applications
Our glazing seals are designed for different glass, frame, facade, and architectural systems, with profile and material configurations matched to the specific sealing, installation, and environmental requirements of each application.
- Curtain Wall Glazing
- Window & Door Glazing
- Commercial Building Facades
- Residential Window Systems
- Glass Partitions
- Fixed & Operable Glazing Systems
- Replacement Glazing Seals
- Custom Architectural Glazing Systems
Glazing Seal Manufacutring
We support custom rubber seal development from profile design and tooling to extrusion, vulcanization, inspection, and mass production, with manufacturing resources sized for both prototype validation and project-scale supply.
5,000 m² Factory & 20 Production Lines
- Factory Area: 5,000 m²
- Production Lines: 20
- Experienced Technicians: 40+
- Monthly Production Capacity: Up to 10 million rubber parts
- Molds: 20,000+
Rubber Extrusion & Vulcanization
- Extrusion: Continuous production of custom rubber profiles and sealing strips
- Vulcanization: One-step vulcanization equipment for forming and stabilizing rubber profiles
- Supporting Processes: Precision cutting, deburring, inspection, and other applicable finishing processes
- Mold Development: Custom tooling developed from customer drawings or samples
Precision Tooling & Profile Development
We operate an in-house mold-making capability with 20,000+ molds and can develop tooling from customer-provided drawings or samples; its mold-making process controls mold error within ±0.01 mm. This supports repeatable profile production after the approved glazing seal design and tooling are confirmed.
Mass Production & Batch Consistency
Sample Development → Tooling → Sample Approval → Mass Production
Glazing Seal Quality Control

-
Profile & Dimensional Inspection
Critical profile dimensions, sealing lips, wall thickness, grooves, retention features, cut lengths, and other geometry are inspected against the approved drawing, sample, specifications, and applicable tolerances.
-
Material & Hardness Inspection
Rubber material, compound, hardness, color, and other specified material properties are verified against the approved material grade and project requirements before production and shipment.
-
Compression & Sealing Performance
Compression, recovery, sealing contact, and retention performance are evaluated to confirm stable contact between the glazing seal, glass, and frame under specified installation conditions.
-
Environmental Resistance Testing
Resistance to temperature, UV, ozone, moisture, chemicals, and other specified environmental exposures is verified according to the material and application requirements.
-
Glass & Frame Compatibility
Seal profiles are checked against the specified glass thickness, aluminum extrusion, glazing pocket, groove dimensions, and installation configuration to confirm proper fit and retention.
-
Installation Verification
Sample seals are evaluated for insertion, positioning, retention, compression, and removal performance to identify profile or installation issues before mass production.
-
Sample Approval & Production Control
Approved drawings, samples, material specifications, and tooling are used as production references to maintain consistency between prototype samples, initial production, and repeat orders.
-
Batch & Final Inspection
Production batches are inspected for dimensional consistency, material conformity, profile appearance, and specified performance, with finished products undergoing final quality inspection before shipment.
Zhonggao's quality system includes dedicated QC personnel, laboratory testing equipment, raw-material inspection, and finished-product inspection, with IATF 16949, ISO 9001, ISO 14001, and ISO 45001 certifications.
Glazing Seal Ordering & Long-Term Supply
Sample & Bulk Production Lead Time
- Sample Lead Time: 3–15 days after requirements are confirmed.
- Bulk Production Lead Time: Approximately 10–30 days after order details and production are confirmed.
- MOQ: Flexible MOQ according to profile, material, tooling, quantity, and project requirements.
Project Packaging & Identification
- Bulk, bagged, labeled, barcode, or customer-specified packaging can be arranged according to order and project requirements.
- Packaging information can be organized by product size, material, drawing number, batch, or other agreed identification requirements.
International Shipping
EXW, FOB, CFR, and CIF are available according to order requirements.
Pre-Shipment Quality Control
Finished products are inspected before shipment, with production quality and packing details checked during final inspection to reduce quantity, specification, and packaging discrepancies at delivery.
1-Year Quality Guarantee
We provide a 1-year quality guarantee covering manufacturing-related quality issues under normal usage conditions, with quality problems handled through its after-sales service process.

FAQ
Q: Can glazing seals be used for both new construction and replacement projects?
A: Yes, glazing seals can be developed for new glazing systems as well as replacement applications where an existing profile needs to be reproduced or matched.
Q: How do I replace an old glazing seal without changing the window frame?
A: Provide the existing seal sample, frame profile, glass thickness, and groove dimensions so the replacement profile can be matched to the existing glazing system.
Q: Are glazing seals suitable for different glass thicknesses?
A: Yes, the seal profile can be configured according to the actual glass thickness and the available clearance within the glazing pocket.
Q: How do I choose between EPDM, silicone, and FKM glazing seals?
A: Material selection depends mainly on the required temperature range, weather exposure, chemical environment, compression performance, and expected service conditions.
Q: Can glazing seals be supplied in custom colors?
A: Yes, custom colors can be discussed according to the approved product specification and project requirements.
Q: Can glazing seals be supplied in continuous lengths?
A: Yes, continuous extrusion can be configured for applications requiring long seal lengths, while cut lengths can also be produced according to project requirements.
Q: How can I prevent glazing seal shrinkage after installation?
A: Profile geometry, material formulation, vulcanization, and dimensional control should be evaluated together to reduce dimensional changes that could affect long-term sealing.
Q: Can glazing seals be used in curtain wall systems?
A: Yes, custom profiles can be developed for curtain wall glazing applications according to the frame geometry, glass configuration, sealing requirements, and environmental conditions.
Q: Can the same glazing seal be used for indoor and outdoor applications?
A: Not necessarily, because outdoor glazing generally requires higher resistance to UV, ozone, moisture, temperature variation, and weather exposure than indoor applications.
Hot Tags: glazing seals, China glazing seals manufacturers, suppliers, epdm profile extrusion, extrusion dies for plastics and rubber, extruded rubber door seals, rubber extrusion manufacturers, epdm rubber extrusion, extrusion silicone compound

