Chemical Resistant Rubber Gaskets

Chemical Resistant Rubber Gaskets
Product Introduction:
Chemical resistant rubber gaskets are important sealing components used in equipment and piping systems that handle chemicals and aggressive fluids. They are mainly used to prevent leakage while resisting degradation caused by chemical exposure, helping maintain reliable sealing and safe operation of the system.
Send Inquiry

Ningbo Zhonggao Rubber & Plastic Manufacturing Co., Ltd. is one of the most reliable manufacturers and suppliers of chemical resistant rubber gaskets in China. The company has world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale custom made chemical resistant rubber gaskets from our factory.

 

Chemical Resistant Rubber Gaskets

 

Chemical Resistant Rubber Gaskets are engineered from application-appropriate rubber compounds to provide reliable sealing against specified chemicals, temperatures, pressures, and operating conditions. Custom materials, dimensions, profiles, and manufacturing requirements help industrial buyers achieve dependable sealing performance while reducing leakage, maintenance, and replacement risks.

 

 

Technical Specifications

 

Rubber Material Selection

Rubber Material

Key Performance

NBR

Oil, Fuel & Hydraulic Fluid Resistance

EPDM

Water, Steam, Ozone & Weather Resistance

FKM

High-Temperature, Oil & Chemical Resistance

HNBR

Heat, Aging, Oil & Mechanical Resistance

CR

Oil, Ozone, Weather & Flame Resistance

Silicone

Wide Temperature Capability & Flexibility

NR

High Elasticity, Tear & Abrasion Resistance

 

Chemical Resistant Rubber Gasket Specifications

Parameter

Typical Reference

Rubber Materials

NBR, EPDM, FKM, HNBR, CR, Silicone, NR

Operating Temperature

NBR: -40°C to +120°C; EPDM: -50°C to +150°C; FKM: -20°C to +200°C; HNBR: -40°C to +150°C; CR: -40°C to +120°C; Silicone: -70°C to +220°C; NR: -60°C to +90°C

Hardness

Shore A 30–90

Tensile Strength

≥5 MPa; typical material range 7–20 MPa*

Elongation at Break

≥200%; typical range 200–700%*

Compression Set

≤20% at 70°C × 22h; general reference ≤35% at 70°C × 24h*

Tear Strength

≥15 kN/m*

Working Pressure

NBR: <16 MPa*; EPDM: <2.5 MPa*; PTFE alternatives: <30 MPa*

Gasket Thickness

0.5–50 mm*

Dimensional Tolerance

Up to ±0.01 mm for applicable precision rubber processing

 

*Final specifications should be confirmed according to the selected compound and application.

 

 

Custom Chemical Resistant Rubber Gaskets

 

We manufacture custom Chemical Resistant Rubber Gaskets based on your chemical media, operating conditions, drawing, sample, equipment, and sealing requirements.

1
Custom Size & Shape

We can produce:
• Custom ID, OD, length, width, and thickness
• Ring, square, rectangular, oval, washer, and flange gaskets
• Irregular shapes, holes, slots, grooves, and cutouts

Rubber Material & Compound

Material and compound can be selected according to:
• Chemical type and concentration
• Operating temperature
• Pressure
• Exposure conditions
• Static or dynamic sealing requirements
Available material options may include NBR, EPDM, FKM, HNBR, CR, and other suitable compounds based on the application.

Drawing / Sample

You can provide:
• CAD or technical drawings
• Dimensions and tolerances
• Chemical and operating conditions
• Material or hardness requirements
• Existing gasket samples
We can use these details to evaluate the sealing requirements and recommend a suitable gasket specification.

Mold & Production

Custom molds can be developed for molded gaskets. Available processes include:
• Compression molding
• Transfer molding
• Injection molding
• Die cutting
Samples can be produced for specification review and approval before mass production.

OEM Service

We support custom:
• Dimensions and gasket geometry
• Material, compound, and hardness
• Packaging and labeling
• Part numbers
• OEM production with customer-provided molds
For customer-provided molds, the customer's project holds the exclusive right to use the molds, while Zhonggao maintains confidentiality to protect customer drawings and intellectual property.

 

 

Chemical Resistant Rubber Gasket Applications

 

Chemical resistant rubber gaskets can be manufactured for equipment and sealing points exposed to oils, fuels, acids, alkalis, solvents, water-based chemicals, and other specified media.

  • Chemical Processing Equipment
  • Pumps & Valves
  • Piping & Flange Connections
  • Hydraulic & Fluid Handling Systems
  • Water & Wastewater Equipment
  • Industrial Machinery & Equipment

 

 

Consistent Chemical Resistant Rubber Gasket Manufacturing

 

Production methods are selected according to gasket geometry, material, dimensions, volume, and required dimensional accuracy.

  • Compression Molding
  • Transfer Molding
  • Injection Molding
  • Die Cutting

Sample to Mass Production

Approved drawings, material specifications, dimensions, and samples can be used as production references before moving to larger-volume manufacturing.

Sample Approval to Repeat Production

Specification Review → Material & Design Confirmation → Sample Production → Approval & Production → Inspection & Delivery → Repeat Orders

Manufacturing Capability

With a 5,000 m² factory, 20 production lines, 20,000+ molds, and a monthly production capacity of up to 10 million rubber parts, Zhonggao supports custom rubber gasket production from prototypes to large-volume orders.

 

 

Chemical Resistant Rubber Gasket Quality Control

 

Raw Material Inspection
Rubber materials and compounds are checked against the approved material, compound, hardness, and production requirements before manufacturing.


Dimensional Inspection
Critical dimensions, including ID, OD, thickness, profile, holes, cutouts, and other specified features are inspected against approved drawings and tolerances.


Physical Property Testing
Depending on the product requirements, physical properties such as hardness, tensile strength, elongation, tear strength, and compression set can be evaluated against specified requirements.


Chemical Compatibility Verification
Chemical compatibility is evaluated against the specified chemical media, concentration, temperature, exposure conditions, and service duration to verify material suitability for the intended sealing application.


Chemical Resistance Performance Testing
Changes in swelling, mass, hardness, dimensions, tensile strength, elongation, surface condition, and other specified properties can be evaluated after chemical exposure to assess material stability and sealing performance.


Batch Consistency Control
Production batches are controlled against approved specifications to help maintain consistent material properties, dimensions, and sealing performance for repeat orders.
Zhonggao's quality system includes dedicated QC personnel, laboratory testing equipment, raw-material inspection, and finished-product inspection, with IATF 16949, ISO 9001, ISO 14001, and ISO 45001 certifications.

 

View Our Quality Inspection Process

2

 

 

Supply Consistency for B2B Orders

 

For industrial buyers, reliable supply means more than producing the first batch. The production process should also support repeatability, traceability, and stable quality across future orders.

  • Consistent Production Standards
  • Production Traceability
  • Flexible Order Support
  • Packaging for Industrial Supply
  • Export Order Support
  • Long-Term B2B Supply Support

 

Learn More About Ningbo Zhonggao

3

 

 

FAQ

 

Q: What chemical resistant gasket is suitable for solvents?

A: The suitable rubber gasket depends on the solvent type, concentration, temperature, exposure time, and required sealing conditions, with FKM, NBR, or another compatible compound considered according to the specific service environment.

Q: Are chemical resistant rubber gaskets suitable for high-pressure applications?

A: Chemical resistant rubber gaskets can be designed for specified pressure conditions, with gasket geometry, rubber hardness, sealing gap, flange structure, and operating temperature considered together.

Q: Can rubber gaskets resist continuous chemical exposure?

A: Yes, continuous exposure can be supported when the selected rubber compound is compatible with the specific chemical, concentration, temperature, and service duration.

Q: Can chemical resistant rubber gaskets be used for gas sealing?

A: Rubber gaskets can be used for static gas sealing when the selected compound, gasket geometry, compression, surface finish, and operating pressure are suitable for the gas application.

Q: What gasket thickness should I use for chemical sealing?

A: Gasket thickness should be selected according to the flange structure, sealing gap, compression requirements, pressure, and available installation space rather than using one thickness for every application.

Q: Can chemical resistant rubber gaskets be supplied to an existing flange standard?

A: Yes, gaskets can be manufactured to match specified flange dimensions, bolt patterns, sealing surfaces, grooves, and applicable flange standards.

Q: How should chemical resistant rubber gaskets be stored before installation?

A: Gaskets should be stored in a cool, dry, clean environment away from direct sunlight, ozone sources, excessive heat, and chemicals that could affect the rubber material.

Q: What is the MOQ for Chemical Resistant Rubber Gaskets?

A: MOQ depends on the material, gasket size and geometry, production method, tooling requirements, and total order quantity, with the specific MOQ confirmed after reviewing the product requirements.

Q: What is the lead time for samples and mass production?

A: Sample delivery time depends on material, tooling, gasket complexity, and sample quantity, typically in 3–15 days, while mass production delivery time depends on the confirmed specifications, order quantity, production method, and production schedule, typically in 10–30 days.

Q: What transportation methods are available for B2B orders?

A: Chemical Resistant Rubber Gaskets can be shipped by express, air, or sea freight according to order quantity, destination, required delivery time, and shipping requirements.

 

 

Custom Chemical Resistant Rubber Gaskets for Your Project

Send your drawing or sample, dimensions, chemical media and concentration, operating temperature, pressure, material requirement, and quantity to receive a suitable chemical resistant rubber gasket solution.

 

 

Hot Tags: chemical resistant rubber gaskets, China chemical resistant rubber gaskets manufacturers, suppliers, copper door seal, grafoil tape, pvc pipe with rubber gasket, rubber gasket for hose, rubber washer m5, thin rubber washers

 Creating Your Custom Rubber Parts Coupled with Our Masterly Manufacturing
 

OEM/ODM Services

 

Material Selection

 

Free Samples

 

Sample Delivery in 3-15 Days

 

Free Technical Consultation

 

24-Hour Response

Get A Free Quote