Extruded Rubber Window Seals

Extruded Rubber Window Seals
Product Introduction:
Extruded rubber window seals are elastic sealing strips formed by precision extrusion process. They are high-performance door and window sealing solutions in the construction and industrial fields. It optimizes the structure on the basis of traditional rubber sealing strips, and significantly improves the sealing, anti-aging and weather resistance through rectangular, L-shaped, corrugated and other cross-sectional designs, combined with high elastic rubber materials. This improvement not only reduces the friction resistance during installation, but also enhances the waterproof, soundproof and wind pressure resistance performance, and is suitable for scenes that require long-term stable sealing, such as building doors and windows, car windows, and industrial equipment hatches. It can meet the needs for sealing reliability and long-term durability under complex climatic conditions and dynamic working conditions, and is an upgraded alternative to traditional sealing strips.
Send Inquiry

Ningbo Zhonggao Rubber & Plastic Manufacturing Co., Ltd. is one of the most reliable manufacturers and suppliers of extruded rubber window seals in China. The company has world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale custom made extruded rubber window seals from our factory.

 

Extruded Rubber Window Seals

 

Extruded rubber window seals provide continuous sealing between glass, frames, and channels to help control air, water, dust, vibration, and weather exposure.

 

 

Technical Specifications

 

Rubber Material Selection:

 

Rubber Material

Key Performance

EPDM

Water, Steam & Aging Resistance

Silicone

Extreme Temperature Resistance & Biocompatibility

FKM

High-Temperature & Chemical Corrosion Resistance

Flame-Retardant Rubber

Fireproof

Conductive Rubber

Electromagnetic Shielding & Anti-Static

 

Extruded Rubber Window Seal Specifications:

 

Parameter

Reference Value / Range

Operating Temperature

EPDM: −50°C to +150°C*; Silicone: −70°C to +250°C; FKM: −20 to +320°C

Rubber Hardness

40–90 Shore A*

Flame Retardant Grade

UL94 V-0

Flame Spread Rate

≤40 mm/min

Surface Resistance

≤1 × 10⁶ Ω/sq*

Electromagnetic Shielding Effectiveness

≥60 dB*

Profile Width

5–100 mm*

Profile Height

3–50 mm*

Wall Thickness

1–10 mm*

Compression Ratio

10–30%*

Surface Friction Coefficient

0.1–0.2

Rebound Rate

≥90%

Dynamic Friction Resistance Reduction

40–50%

Waterproof Rating

Up to IP67

Sound Insulation Improvement

20–30 dB

Tear Strength

20–30 kN/m

Dynamic Wear Rate

≤1/3 of ordinary rubber

Outdoor Service Life

10 years, 2-3 times longer than that of traditional sealing strips

 

*Parameters should be finally confirmed according to the selected compound, profile design, and application requirements.

 

 

Custom Extruded Rubber Window Seals

 

We manufacture custom extruded rubber window seals based on your drawing, sample, window system, and application conditions.

image 15

Custom Profile & Dimensions

We can produce:

  • Custom profile width, height, wall thickness, and length
  • Rectangular, L-shaped, corrugated, and other cross-sections
  • Sealing lips, bulbs, retaining sections, channels, and other profile features
  • Straight profiles, coils, cut-to-length sections, and frame-specific configurations
  • Custom cross-sections with holes, slots, grooves, or other required features

 

Rubber Material & Hardness

Material and hardness can be selected according to:

  • Operating temperature
  • UV, ozone, and weather exposure
  • Water, chemicals, or other media
  • Compression requirements
  • Static or dynamic sealing conditions
  • Flame-retardant requirements for fire-resistant sealing applications
  • Conductive requirements for electromagnetic shielding or anti-static applications

Available material options include:

  • EPDM for weather, UV, and ozone resistance
  • Silicone for high- and low-temperature applications
  • FKM for higher chemical and temperature resistance
  • Flame-retardant rubber for rail transit and building fireproof sealing
  • Conductive rubber with conductive fillers for electromagnetic shielding and anti-static applications

 

Color, Surface & Installation Options

We can customize:

  • Black, white, transparent, and other specified colors
  • Laser-engraved or barcode identification
  • PET/PE surface coatings for improved wear resistance
  • Pre-coated adhesive layers for nail-free installation

 

Drawing / Sample / Window System

You can provide:

  • CAD or technical drawings
  • Frame and groove dimensions
  • Glass or panel thickness
  • Critical dimensions and tolerances
  • Existing window seal samples

We can use these details to evaluate the profile and develop a suitable extrusion solution.

 

Tooling & Production

Custom extrusion tooling can be developed for your required profile. Available production options can include:

  • Rubber extrusion
  • Cut-to-length processing
  • Splicing
  • Vulcanized or molded corners

Samples can be produced for fit and sealing verification before mass production.

 

OEM Service

We support custom:

  • Profile dimensions
  • Rubber material and hardness
  • Length and cutting
  • Corner or joint configurations
  • Packaging and labels
  • Part numbers and OEM specifications

If you provide your own tooling, we can produce according to your approved mold or die while keeping the tooling and related technical information confidential and restricted to your project.

 

 

Extruded Rubber Window Seal Applications

 

Extruded rubber window seals are used across building, automotive, industrial, electrical, and transportation applications where reliable sealing against water, air, dust, noise, and outdoor exposure is required.

  • Building Windows & Doors
  • Curtain Wall & Glazing Systems
  • Automotive Windows
  • Industrial Equipment Hatches
  • Electrical & Control Cabinets
  • Rail Transit & Outdoor Equipment

 

 

Extruded Rubber Window Seal Manufacturing

 

Zhonggao manufactures custom extruded rubber window seals in a 5,000 m² factory with 20 production lines, 20,000+ molds, and 40+ technicians, with monthly production capacity of up to 10 million rubber parts. Custom profiles can be developed from drawings or samples, while sample production typically takes 3–15 days and mass production takes 10–30 days after order details are confirmed.

 

This manufacturing capacity allows suppliers to support projects ranging from 5,000 to 50,000 or even 500,000 pieces while maintaining the same approved profile and production specifications across larger and repeat orders. For buyers, this means a window seal program can move from sample validation to high-volume supply without changing the established profile, tooling, or production requirements.

 

We can help you verify:

Profile Drawing Approval → Pre-Production Sample → Material & Performance Verification → Approved Sample → Production Specification → Mass Production

 

 

Extruded Rubber Window Seal Quality Control

 

image
  • Raw Material Inspection

EPDM, silicone, FKM, and other approved rubber compounds are checked against the specified material and hardness requirements before extrusion to verify material conformity.

  • Profile Dimensional Inspection

Critical profile width, height, wall thickness, sealing lips, grooves, channels, and other cross-sectional dimensions are inspected against the approved drawing, sample, specifications, and applicable tolerances.

  • Physical Property Testing

Applicable hardness, tensile strength, elongation, compression set, rebound, and other physical properties are tested according to the approved product requirements and relevant test methods.

  • Appearance Inspection

Finished window seals are inspected for surface defects, cracks, blisters, foreign matter, extrusion marks, deformation, dimensional irregularities, and other visible defects that could affect installation or sealing.

  • Finished Product & Batch Inspection

Finished seals are checked against approved specifications before packing, while production and inspection records help maintain consistent profile, material, and performance requirements across 5,000, 50,000, or 500,000-piece batches and repeat orders.

Zhonggao's quality system includes dedicated QC personnel, laboratory testing equipment, raw-material inspection, and finished-product inspection, supported by IATF 16949, RoHS, ISO 9001, ISO 14001, and ISO 45001 certifications.

View Our Quality Inspection Process

 

 

Extruded Rubber Window Seal Supply Support

 

Zhonggao supports extruded rubber window seal projects from sample evaluation to bulk supply and repeat orders, with technical consultation for material selection, profile confirmation, and application requirements.

  • MOQ Discussion
  • Production Scheduling
  • Lead Time Confirmation
  • Inspection Documents
  • Custom Packaging
  • EXW, FOB, CFR & CIF Delivery Terms
  • Repeat-Order Support
  • 1-Year Quality Guarantee

 

Learn More About Ningbo Zhonggao

image 1

 

 

FAQ

 

Q: Can extruded rubber window seals be used for irregular window frame profiles?

A: Yes, custom extrusion tooling can produce non-standard profiles to match irregular frame channels, retaining sections, sealing lips, or other installation geometries.

Q: How do I specify the correct rubber hardness for a window seal?

A: Rubber hardness should be selected according to the required compression force, profile geometry, installation method, and sealing contact conditions.

Q: Can rubber window seals be supplied in continuous lengths?

A: Yes, extruded window seals can be supplied as continuous profiles or cut to specified lengths according to the installation and packaging requirements.

Q: Can window seals be supplied with vulcanized corners?

A: Yes, straight extruded profiles can be combined with vulcanized or molded corners when a continuous frame seal is required.

Q: Can extruded window seals be supplied with adhesive backing?

A: Yes, a pre-coated adhesive layer can be added where the installation requires nail-free or simplified positioning.

Q: Can I order rubber window seals with my own part number or packaging?

A: Yes, OEM part numbers, labels, barcode identification, and customized packaging can be supplied according to the approved requirements.

Q: How are extruded rubber window seals packaged for international shipping?

A: Window seals can be packaged according to profile shape, length, quantity, and transportation requirements to reduce deformation and simplify receiving and installation.

Q: Can you reproduce an existing window seal from a sample?

A: Yes, an existing seal sample can be used together with frame, groove, and critical dimension information to develop a matching extrusion profile.

Q: Can you support repeat orders with the same window seal specification?

A: Yes, approved profile, material, tooling, and production specifications can be retained for repeat orders to support consistent supply across subsequent batches.

 

 

Custom Extruded Rubber Window Seals for Your Project
Send your drawing or sample, window frame and groove dimensions, glass or panel thickness, profile cross-section and critical dimensions, material or hardness requirements, operating temperature, UV, weather or chemical exposure, compression and sealing requirements, installation method, and required quantity to receive a suitable extruded rubber window seal solution.

 

 

 

Hot Tags: extruded rubber window seals, China extruded rubber window seals manufacturers, suppliers, extrusion dies for plastics and rubber, extruded rubber shapes, extrusion gasket, extruding rubber, custom extruded rubber profiles, rubber c channel extrusion

 Creating Your Custom Rubber Parts Coupled with Our Masterly Manufacturing
 

OEM/ODM Services

 

Material Selection

 

Free Samples

 

Sample Delivery in 3-15 Days

 

Free Technical Consultation

 

24-Hour Response

Get A Free Quote