Food Grade Rubber Gaskets

Food Grade Rubber Gaskets
Product Introduction:
Food grade rubber gaskets are important sealing components used in food processing, beverage, dairy and other hygienic applications. They are mainly used to prevent the leakage or contamination of food and fluids while providing reliable sealing in processing equipment, helping maintain hygienic conditions and safe operation.
Send Inquiry

Ningbo Zhonggao Rubber & Plastic Manufacturing Co., Ltd. is one of the most reliable manufacturers and suppliers of food grade rubber gaskets in China. The company has world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale custom made food grade rubber gaskets from our factory.

 

Food Grade Rubber Gaskets

 

Food grade rubber gaskets are engineered for reliable sealing in food and beverage processing equipment, with material selection based on food-contact requirements, operating conditions, and cleaning cycles. Custom compounds, dimensions, profiles, and manufacturing processes help buyers achieve hygienic performance, consistent sealing, and dependable repeat production.

 

 

Technical Specifications

 

Rubber Material Selection

Rubber Material

Key Performance

EPDM

Excellent Water, Steam & Weather Resistance

Silicone

Excellent Temperature, Flexibility & Food-Contact Performance

NBR

Good Oil, Fat & Mechanical Resistance

FKM

High-Temperature, Oil & Chemical Resistance

 

Food Grade Rubber Gasket Specifications

Parameter

Specification

Material

EPDM; Silicone; NBR; FKM

Temperature Range

EPDM: -50°C to +150°C, up to +180°C short-term; Silicone: -70°C to +220°C; NBR: -40°C to +120°C; FKM: -20°C to +200°C

Hardness

Typical gasket grades: 55–75 Shore A for EPDM/NBR; 55–65 Shore A for Silicone; 65–85 Shore A for FKM

Tensile Strength

≥7 MPa for EPDM*; ≥5 MPa for general rubber gasket grades*; typical NBR: 8–14 MPa*; EPDM: 8–15 MPa*; Silicone: 5–10 MPa*; FKM: 10–20 MPa*

Elongation at Break

≥200%; typical NBR: 200–400%*; EPDM: 300–500%*; Silicone: 200–500%*; FKM: 150–300%*

Compression Set

Typical rubber gasket range: ≤20–30% at 70°C × 22 h*

Tear Strength

≥15 kN/m for general rubber gasket grades*

Density

0.85–1.30 g/cm³, depending on compound formulation*

Recommended Compression

15–30% for typical static rubber gasket designs*

Working Pressure

Up to 2.5 MPa for typical rubber gasket applications*

Gasket Thickness

1.0–10.0 mm for typical flat rubber gaskets*

Dimensional Tolerance

Typically ±0.10–0.30 mm for machined or molded critical dimensions*

Hardness Tolerance

Typically ±5 Shore A*

Food-Contact Regulation

FDA 21 CFR 177.2600, where applicable to the selected rubber compound and intended food-contact conditions

Steam Resistance

EPDM: Suitable up to +150°C, short-term up to +180°C; other materials require compound-specific verification

 

*Reference values are based on typical material and gasket grades. Actual performance depends on the selected compound, gasket design, dimensions, food medium, temperature, pressure, and cleaning conditions.

 

 

Custom Food Grade Rubber Gasket

 

We manufacture custom food grade rubber gaskets based on your drawing, sample, equipment, food-contact requirements, and working conditions.

1
Custom Size & Shape

We can produce:
• Custom ID, OD, length, width, thickness, and dimensional tolerances
• Flat, ring, square, rectangular, oval, washer, and flange gaskets
• Irregular shapes, holes, slots, grooves, cutouts, and equipment-specific profiles

Food-Contact Material & Hardness

Rubber compound and hardness can be selected according to:
• Food or beverage medium
• Food-contact requirements and applicable regulations
• Operating temperature and pressure
• CIP, SIP, steam, or cleaning conditions
• Static or dynamic sealing requirements

Drawing / Sample

You can provide:
• CAD or technical drawings
• Dimensions and tolerances
• Existing gasket samples
• Food-contact and operating requirements
We can use these details to evaluate the application, recommend a suitable gasket specification, and develop the required part.

Mold & Production

Custom molds can be developed for molded food grade rubber gaskets. Available processes include:
• Compression molding
• Transfer molding
• Injection molding
• Die cutting
Samples can be produced for dimensional and application approval before mass production.

OEM Service

We support custom:
• Dimensions, profiles, materials, and hardness
• Packaging and product labels
• Part numbers and identification requirements
• OEM production with customer-provided molds
For customer-provided molds, Zhonggao maintains confidentiality for customer drawings, specifications, and intellectual property, while production follows the approved project requirements.

 

 

Applications of Food Grade Rubber Gaskets

 

Food grade rubber gaskets are used in equipment where reliable sealing, hygienic operation, and controlled material selection are required.

  • Food Processing Equipment
  • Beverage Processing Equipment
  • Dairy Processing Equipment
  • Brewing & Fermentation Equipment
  • Food & Beverage Piping Systems
  • Filling & Packaging Equipment
  • Water & Ingredient Handling Systems
  • Industrial Food Machinery

 

 

Food Grade Rubber Gaskets Manufacturing

 

Food grade rubber gaskets are manufactured according to the approved material, dimensions, gasket profile, and application requirements. The production method is selected according to the gasket structure, material, quantity, and required dimensional accuracy.

Manufacturing Process & Methods

Material Preparation → Molding & Forming → Trimming & Secondary Processing → Final Inspection & Packaging
Different manufacturing methods can be used according to gasket design:
• Compression Molding
• Transfer Molding
• Injection Molding
• Die Cutting

From Prototype to Repeat Production

From Prototype to Repeat Production → Prototype / Sample Production → Sample Evaluation → Specification Approval → Mass Production → Repeat Orders

Manufacturing Capability

With a 5,000 m² factory, 20+ production lines, 20,000+ molds, and production capacity of up to 10 million rubber parts per month, Zhonggao supports high-volume gasket manufacturing with automated production and inspection equipment designed for repeatable, batch-to-batch production. A 1-year quality guarantee is provided for qualified product quality issues.

 

 

Food Grade Rubber Gasket Quality Control & Batch-to-Batch Consistency

 

Raw Material Inspection
Food grade rubber compounds are checked against the approved material, compound, and hardness requirements before production to verify material conformity.


Dimensional Inspection
Critical dimensions, including ID, OD, thickness, profiles, holes, cutouts, and other sealing features, are inspected against the approved drawing, specifications, and applicable tolerances.


Physical Property Testing
Applicable hardness, tensile strength, elongation, compression set, and other specified physical properties can be tested according to the approved product requirements and relevant test methods.


Appearance Inspection
Finished gaskets are inspected for surface defects, excessive flash, cracks, blisters, foreign matter, warping, deformation, and other visible conditions that could affect installation, sealing, or hygienic use.


Finished Product & Batch Inspection
Finished products are checked against approved specifications before packing. Production, inspection, material, and applicable batch records can be maintained to support product identification, traceability, and consistency across repeat orders.
Zhonggao's quality system includes dedicated QC personnel, laboratory testing equipment, raw-material inspection, and finished-product inspection. Its management systems include IATF 16949, ISO 9001, ISO 14001, and ISO 45001 certifications.

 

View Our Quality Inspection Process

2

 

 

Repeat Order & Supply Support

 

We support food grade rubber gasket procurement from application review and sampling through mass production and repeat orders.

  • Application-Matched Specifications: Food or beverage media, operating conditions, cleaning requirements, material grade, hardness, dimensions, and tolerances can be reviewed together to establish a suitable gasket specification.
  • Approved Specification Control: Approved drawings, samples, material grades, hardness, dimensions, tolerances, inspection requirements, and packaging specifications can be used as the production reference for subsequent orders.
  • Repeat-Order Consistency: Repeat production follows the approved specifications and inspection requirements to help maintain consistent dimensions, physical properties, and sealing characteristics across batches.
  • Batch Identification & Traceability: Material and production information can be controlled according to applicable quality requirements to support batch identification and production traceability when required.
  • OEM Production Support: OEM production can be arranged according to customer drawings, samples, specifications, part numbers, packaging, labeling, and other approved requirements for food and beverage equipment applications.

 

Learn More About Ningbo Zhonggao

3

 

 

FAQ

 

Q: Can food grade rubber gaskets be used for hot water and steam applications?

A: Yes, materials such as EPDM and silicone can be considered for hot water or steam service when their specific temperature range, compound, and cleaning-cycle requirements are suitable for the application.

Q: Are food grade rubber gaskets suitable for oils and fatty foods?

A: Yes, NBR or FKM can be considered for applications involving oils and fats, but the specific food medium, temperature, exposure time, and required food-contact compound should be verified before production.

Q: Can food grade rubber gaskets be supplied in different colors?

A: Yes, gasket colors can be specified according to the approved material, application, identification, and production requirements.

Q: Can food grade rubber gaskets be supplied with individual packaging or batch labels?

A: Yes, packaging can be arranged by part number, size, material grade, drawing number, or batch, with labeling requirements agreed before production.

Q: Can you provide inspection or test documents with a food grade gasket order?

A: Yes, applicable material information, dimensional inspection records, test reports, or other agreed quality documents can be provided according to the project requirements.

Q: What is the MOQ for food grade rubber gaskets?

A: MOQ is flexible according to the gasket type, size, material, tooling, and production requirements, with prototype or small-volume orders discussed separately from larger production programs.

Q: How long does it take to deliver samples and mass production orders?

A: Samples typically take 3–15 days, while standard mass-production orders generally take about 10–30 days after order details and production are confirmed, depending on quantity and customization.

Q: What shipping methods are available for food grade rubber gasket orders?

A: Orders can be shipped by international express, air freight, or sea freight, with the suitable method arranged according to order quantity, destination, delivery schedule, and agreed trade terms.

 

 

Custom Food Grade Rubber Gaskets for Your Project

Provide your drawing, sample, dimensions, food or beverage medium, food-contact requirements, cleaning conditions, operating temperature and pressure, or quantity to receive a suitable food grade rubber gasket solution.

 

 

Hot Tags: food grade rubber gaskets, China food grade rubber gaskets manufacturers, suppliers, 4 rubber gasket ring, gutter rubber gasket, hypalon gasket, rubber donut gasket, rubber seal sheet, t shaped gasket

 Creating Your Custom Rubber Parts Coupled with Our Masterly Manufacturing
 

OEM/ODM Services

 

Material Selection

 

Free Samples

 

Sample Delivery in 3-15 Days

 

Free Technical Consultation

 

24-Hour Response

Get A Free Quote