Ningbo Zhonggao Rubber & Plastic Manufacturing Co., Ltd. is one of the most reliable manufacturers and suppliers of automotive o ring in China. The company has world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale custom made automotive o ring from our factory.
Automotive O Rings
Automotive O rings provide reliable sealing in engine, fuel, cooling, transmission, and other vehicle systems. Custom sizes, rubber compounds, and hardness options help meet application-specific requirements, maintain sealing performance, and support consistent automotive production.
Technical Specifications
Rubber Material Selection:
|
Rubber Material |
Key Performance |
|
NBR |
Mineral Oil, Hydraulic Fluid & Fuel Resistance |
|
HNBR |
Heat, Aging & Wear Resistance |
|
FKM |
High-Temperature, Oil & Chemical Resistance |
|
EPDM |
Water, Coolant, Ozone & Weather Resistance |
|
Silicone (VMQ) |
High & Low-Temperature Flexibility |
|
FVMQ |
Low-Temperature Flexibility & Fuel Resistance |
Automotive O Ring Specifications:
|
Specification |
Reference Value / Range |
|
Inner Diameter (ID) |
5–100 mm* |
|
Cross-Section Diameter (CS) |
1.5 / 1.78 / 2.0 / 2.5 / 2.62 / 3.0 / 3.53 / 4.0 / 5.0 / 5.33 / 5.7 / 6.0 mm* |
|
Outer Diameter (OD) |
OD = ID + 2 × CS |
|
Rubber Material |
NBR, HNBR, FKM, EPDM, Silicone (VMQ), FVMQ |
|
Rubber Hardness |
40–90 Shore A* |
|
NBR Operating Temperature |
−40°C to +120°C |
|
HNBR Operating Temperature |
−40°C to +150°C |
|
FKM Operating Temperature |
−20°C to +200°C; short-term exposure up to +250°C* |
|
EPDM Operating Temperature |
−50°C to +150°C; short-term exposure up to +180°C* |
|
Silicone (VMQ) Operating Temperature |
−70°C to +220°C |
|
FVMQ Operating Temperature |
Approximately −60°C to +175°C* |
*Actual specifications depend on the rubber compound, OEM drawing, applicable standards, contact medium, operating temperature, pressure, and static or dynamic sealing conditions.
Custom Automotive O Rings
We manufacture custom automotive O rings based on your drawings, samples, OEM part numbers, and application requirements to meet specific automotive sealing and assembly needs.

Custom Size & Dimensions
We can produce:
- Custom inner diameter (ID) and cross-section diameter (CS)
- Metric and inch sizes
- Specified dimensional tolerances
- O rings for engine, fuel, cooling, transmission, and other automotive systems
Material & Hardness
Rubber compound and Shore A hardness can be selected according to:
- Contact medium, including specified oils, fuels, coolants, and other fluids
- Minimum and maximum operating temperatures
- Working pressure and pressure variations
- Static or dynamic sealing conditions
- Compression, wear, and aging requirements
OEM Drawing / Sample
You can provide:
- OEM part numbers and drawing revisions
- CAD or technical drawings with critical dimensions and tolerances
- Material specifications and hardness requirements
- Existing O ring samples
- Groove dimensions and operating conditions
We use these details to assess dimensional fit, material compatibility, and application-specific sealing requirements.
Mold Development & Sample Approval
Custom molds can be developed for non-standard O ring dimensions and designs. The production process is selected according to the part design and manufacturing requirements.
- Custom mold development based on approved drawings or samples
- Suitable molding process selection
- Sample production for dimensional and application verification
- Sample approval before mass production
OEM Configuration & Identification
We support customer-specific requirements for:
- Dimensions and tolerances
- Rubber compound and hardness
- OEM part numbers and product identification
- Packaging and batch labeling
- Production using customer-provided molds, where technically suitable
Drawing revisions, material specifications, and approved samples can be used as references for repeat orders to help maintain consistency across production batches.
Automotive O Ring Applications
Automotive O rings are used across multiple vehicle systems, with material compatibility, temperature resistance, pressure requirements, and sealing performance selected to match each application`s operating conditions.
- Engine & Lubrication Systems
- Fuel Systems
- Automotive Air Conditioning Systems
- Cooling & Thermal Management Systems
- Transmission & Power Steering Systems
- Brake & Hydraulic Systems
Automotive O Ring Manufacturing Capability
With a 5,000 m² factory, 20 production lines, 20,000+ molds, and 40+ technicians, we support custom automotive O ring development and repeat production.
- Precision Mold Development: Custom molds are developed from drawings or samples, with mold-making accuracy of ±0.01 mm to support dimensional fit and sealing groove requirements.
- Multiple Molding Processes: Compression, transfer, and injection molding accommodate different O ring designs, rubber compounds, and production requirements.
- Material & Design Flexibility: Multiple rubber materials, including NBR, HNBR, FKM, and EPDM, support application-specific requirements for fluid compatibility, temperature, hardness, and sealing conditions.
- Scalable Production: Production capacity reaches up to 10 million rubber parts per month across the product range, supporting volume orders and repeat supply.
- Automotive Quality Management: IATF 16949 quality management supports automotive rubber manufacturing, with inspection and product requirements defined according to approved drawings and project specifications.
Automotive O Ring Quality Control

-
Dimensional Inspection
ID, OD, cross-section diameter, and dimensional tolerances are checked against approved drawings and applicable standards.
-
Material & Hardness Inspection
Rubber compound and Shore A hardness are verified against specified material grades and application requirements.
-
Visual & Surface Inspection
Automotive O rings are checked for cracks, cuts, bubbles, flash, and surface defects that may affect sealing performance.
-
Material Compatibility Validation
Rubber compounds are evaluated for compatibility with specified oils, fuels, coolants, and other contact media under intended operating conditions.
-
Temperature & Sealing Performance Testing
Application-specific tests verify performance under specified temperatures, pressures, and static or dynamic sealing conditions.
-
OEM Drawing & Fitment Verification
Dimensions, groove compatibility, and installation requirements are reviewed against OEM drawings, part specifications, or approved samples.
-
Batch Traceability & Change Control
Production batches are linked to relevant material and manufacturing records, while changes to compounds, tooling, or processes are controlled to maintain consistency.
-
Final Inspection & Release
Finished automotive O rings are inspected against agreed acceptance criteria before shipment to help reduce nonconforming parts and assembly issues.
Zhonggao's quality system includes dedicated QC personnel, laboratory testing equipment, raw-material inspection, and finished-product inspection, with IATF 16949, ISO 9001, ISO 14001, and ISO 45001 certifications.
B2B Ordering & Supply Support
Flexible MOQ & Order Quantities
MOQ depends on stock availability, dimensions, material, tooling, and customization requirements.
Sample Production & Approval
Sample lead time: 3–15 days
Sample cost: Free samples may be available; shipping costs apply.
Pre-production approval: Confirm dimensions, material, hardness, and application requirements before mass production.
Production & Delivery Lead Time
In-stock items: Typically 3–8 days for delivery processing.
Custom O ring orders: Approximately 10–30 days after specifications and production are confirmed.
Actual lead time depends on order quantity, tooling, material requirements, and production scheduling.
Shipping & Delivery Terms
Available delivery terms include EXW, FOB, CFR, and CIF, allowing buyers to select arrangements based on their freight planning and import requirements. Confirm the shipping method, destination, packaging, and delivery schedule when requesting a quotation.
Quality Guarantee & Repeat Orders
A 1-year quality guarantee covers manufacturing defects under normal usage conditions. For repeat orders, provide the approved drawing revision, material specification, hardness, and sample reference to help maintain consistency between batches.

FAQ
Q: What causes automotive O rings to leak after installation?
A: Common causes include incorrect groove dimensions, improper compression, surface damage, installation twisting, and incompatibility between the rubber compound and operating fluid.
Q: Can a standard O ring replace an OEM automotive O ring?
A: A replacement should match the OEM specification for dimensions, material, hardness, sealing conditions, and operating environment rather than relying on size alone.
Q: Should automotive O rings be lubricated before installation?
A: Use only a lubricant compatible with the automotive O ring material and system fluid, following the vehicle manufacturer's installation requirements to prevent swelling, damage, or contamination.
Q: How can automotive O rings be protected during storage?
A: Store automotive O rings in a cool, dry, dark environment away from direct sunlight, ozone sources, excessive heat, and chemicals, while keeping them protected from deformation and contamination.
Q: What information helps identify the cause of repeated automotive O ring failure?
A: Provide the failed automotive O ring, installation location, operating temperature and pressure, contact fluid, service duration, and photographs of the failure to support root-cause analysis.
Hot Tags: automotive o ring, China automotive o ring manufacturers, suppliers, 011 o ring, 222 o ring, adjustable o ring, oring 38x4, rubber o rings, sealing ring

