Ningbo Zhonggao Rubber & Plastic Manufacturing Co., Ltd. is one of the most reliable manufacturers and suppliers of extruded rubber seal in China. The company has world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale custom made extruded rubber seal from our factory.
Extruded Rubber Seals
Extruded rubber seals are custom-made in solid, hollow, lip, bulb, U-channel, and complex profiles to match specific sealing and installation requirements.
Technical Specifications
Rubber Material Selection:
|
Rubber Material |
Key Performance |
|
EPDM |
Water, Steam & Aging Resistance |
|
NBR |
Oil & Wear Resistance |
|
CR |
Weather, Aging & Flame Resistance |
|
Silicone |
Extreme Temperature Resistance & Biocompatible |
|
NR |
Good Elastic, Wear & Tear Resistance |
|
FKM |
Extremely Chemical resistance |
|
TPE /TPV |
Recyclable & Environmentally Friendly |
Extruded Rubber Seal Specifications:
|
Parameter |
Reference Value / Range |
|
Material |
EPDM, NBR, CR, Silicone, NR, FKM*, TPE/TPV* |
|
Hardness |
50–70 Shore A |
|
Tensile Strength |
≥5 MPa |
|
Elongation at Break |
≥300% |
|
Compression Set |
≤30% (70°C × 22h) |
|
Operating Temperature |
EPDM: −50°C to +150°C; NBR: −40°C to +120°C; CR: −40°C to +120°C; Silicone (VMQ): −70°C to +220°C; NR: −60°C to +90°C; FKM: −20°C to +200°C*; TPE/TPV: −40°C to +125°C* |
|
Dynamic Compression Deformation |
<15% |
|
Compression Durability |
500,000 cycles; sealing performance decay ≤5% |
|
Friction Reduction |
Up to 40% with PTFE coating or self-lubricating modified layer |
|
Dimensional Tolerance |
up to ±0.1 mm for applicable profile dimensions* |
|
Section Designs |
20+ section designs |
|
Outdoor Service Life |
15 years for applicable EPDM and Silicone seal applications |
*Actual values should be confirmed against the specific compound, profile design, operating conditions, and application requirements before production.
Custom Extruded Rubber Seals
We manufacture custom extruded rubber seals based on your drawing, sample, profile requirements, installation conditions, and working environment.

Custom Profile, Size & Shape
We can produce:
- Solid, hollow, bulb, lip, D-section, P-section, and U-channel profiles
- Custom width, height, wall thickness, cavity, lip, and other profile dimensions
- Complex cross-sections, grooves, holes, and other profile features
- Continuous lengths, cut-to-length seals, and joined seal configurations
Rubber Material & Hardness
Rubber material and hardness can be selected according to:
- Operating and peak temperature
- Water, oil, fuel, chemical, or other medium contact
- UV, ozone, weathering, and other environmental exposure
- Compression and sealing requirements
- Static or dynamic sealing conditions
Drawing / Sample
You can provide:
- CAD or technical drawings
- Cross-section dimensions and tolerances
- Installation groove and sealing gap dimensions
- Material and hardness requirements
- Existing seal samples
We can use these details to evaluate the profile, material, compression requirements, and production feasibility before tooling or mass production.
Tooling & Production
Custom extrusion tooling can be developed for application-specific profiles. Available production options include:
- Rubber profile extrusion
- Co-extrusion where applicable
- Reinforced rubber extrusion where applicable
- Cut-to-length processing
- Joined or spliced seal production where required
Samples can be produced for dimensional and application approval before mass production.
OEM Service
We support custom:
- Profile dimensions and tolerances
- Material and hardness
- Color and surface finish
- Cut length and supply form
- Packaging and labels
- Part numbers and customer specifications
- OEM production using customer-provided tooling where applicable
For customer-owned tooling, the molds remain dedicated to the customer's project, while we keep the related drawings, tooling information, and product specifications confidential to protect project data and intellectual property.
Extruded Rubber Seal Applications
Extruded rubber seals can be specified by material, profile, and sealing requirements to meet the operating conditions of automotive, construction, electronics, household appliances, aerospace, and other applications.
- Automotive & Transportation
- Industrial Equipment
- Doors, Windows & Enclosures
- HVAC & Refrigeration
- Construction & Infrastructure
- Electrical & Electronic Equipment
Extruded Rubber Seal Manufacturing
Manufacturing Process
Profile Extrusion → Vulcanization & Post-Curing → Tooling & Profile Repeatability
From Sample Approval to Mass Production
Drawing / Sample Review → Tooling & Prototype → Sample Approval → Mass Production
Batch-to-Batch Consistency
- Profile dimensions
- Hardness
- Material
- Appearance
- Compression behavior
Repeat-Order Consistency
Same Specification → Same Approved Standard → Controlled Repeat Production
Manufacturing Capabilities
- We can provide:
- 20 production lines
- Up to 10 million rubber parts/month
- 20,000+ molds
- 40+ technicians
- 5,000 m² factory
- Mold error controlled within ±0.01 mm for applicable tooling
- Customer-owned molds accepted where applicable
- Drawing/sample approval before production
These capabilities help buyers scale from 5,000 to 500,000 units with more consistent quality, controlled production, and a lower risk of variation or supply disruption across repeat orders.
Extruded Rubber Seal Quality Control

-
Raw Material & Compound Inspection
Raw materials and rubber compounds are checked against approved material, compound batch, hardness, and consistency requirements before extrusion.
-
Profile & Dimensional Inspection
Extruded profiles are inspected for width, height, wall thickness, critical cross-section dimensions, cut length, and applicable tolerances against the approved drawing and specifications.
-
Physical Performance Testing
Applicable tensile strength, elongation, compression set, hardness, heat aging, and chemical compatibility are tested according to product requirements and application conditions.
-
Appearance, Batch & Traceability Control
Finished seals are inspected for surface defects, cracks, bubbles, voids, contamination, profile deformation, and color consistency, while records trace each batch from raw material and extrusion production through inspection, packaging, and shipment.
-
Approved Profile & Sample Control
Production is controlled against the approved drawing revision, sample, material, hardness, critical dimensions, tolerances, color, and surface finish to maintain consistency across mass production and repeat orders.
Zhonggao's quality system includes dedicated QC personnel, laboratory testing equipment, raw-material and finished-product inspection, with IATF 16949, ISO 9001, ISO 14001, and ISO 45001 certifications.
Extruded Rubber Seal Supply Support
MOQ should be confirmed according to the specific extruded rubber seal design, material, tooling requirements, and production quantity.
- The general lead time of sample is around 3–15 days.
- The general lead time of mass production is around 10–30 days after order confirmation.
- For repeat B2B orders, part numbers, quantities, and other identification requirements can be specified to support warehouse and purchasing control.
- A 1-year quality guarantee is provided for qualified product quality issues.
Zhonggao supports EXW, FOB, CFR, and CIF delivery terms, allowing the transportation arrangement to be selected according to the purchasing requirement.
You can get:
- Better Fit for Existing Assemblies
- Application-Specific Material Selection
- Controlled Production Consistency
- Repeat-Order Support

FAQ
Q: What Is the Difference Between Extruded Rubber Seals and Molded Rubber Seals?
A: Extruded rubber seals are continuously produced through a profile die, making them suitable for long, uniform sealing profiles and cut-to-length applications.
Q: Can Extruded Rubber Seals Be Supplied With Adhesive Backing?
A: Yes, adhesive backing can be added where required to simplify positioning and installation during assembly.
Q: Can Extruded Rubber Seals Be Spliced Into Continuous Frames?
A: Yes, extruded profiles can be joined or spliced into closed-loop frames when the application requires a continuous perimeter seal.
Q: Can Extruded Rubber Seals Be Cut Into Specific Lengths?
A: Yes, continuous extruded profiles can be cut to specified lengths for individual components, kits, or assembly lines.
Q: Can Extruded Rubber Seals Be Made With Metal Reinforcement?
A: Yes, metal skeletons and other reinforcement structures can be incorporated into applicable extruded rubber profiles to improve installation stability and structural support.
Q: Can Extruded Rubber Seals Be Used for Outdoor Applications?
A: Yes, suitable EPDM and Silicone profiles can be used outdoors where resistance to UV, ozone, moisture, and weathering is required.
Q: Are Extruded Rubber Seals Available in Food-Grade Materials?
A: Yes, Silicone rubber can be supplied for applicable food-contact sealing applications when the required material and compliance specifications are confirmed.
Q: Can Extruded Rubber Seals Be Used for EMI Shielding?
A: Yes, conductive rubber composite profiles can be used for applications requiring sealing together with electromagnetic interference shielding.
Q: Can Extruded Rubber Seals Be Supplied With Customer-Owned Tooling?
A: Yes, customer-owned extrusion tooling can be used for applicable OEM production while the related drawings, tooling information, and product specifications remain confidential.
Q: What Packaging Options Are Available for Extruded Rubber Seals?
A: Packaging can be arranged according to profile length, coil or straight-piece supply, quantity, labeling, and handling requirements for shipment and assembly.
Hot Tags: extruded rubber seal, China extruded rubber seal manufacturers, suppliers, extruded rubber strip, rubber extrusion shapes, extrusion gasket, extruded rubber channel, rubber c channel extrusion, rubber extrusions and seals

